|
| |
12
10
8 | 2,50
2,50
2,50 | 180
/ 250
180 / 250
180 / 250 | 1.900 / 2.100
1.650
/ 1.850
1.450 / 1.650 | 65 / 70
65 / 70
65
/ 70 |
|
| |
Girders
in hot dipped galvanized steel En Uni 10025:2004 S275JR according to the standards
UNI EN ISO 1461. Main frame made from hot-dipped galvanized steel and head frames
UPN 200/220 with transversal corners 80x40x6. nuts and bolts and fastenings in
stainless steel. | Made in fine exotic wood staves (dim
2.2x12/14 cm) fixed with self-tapping screws in stainless steel which resist a
traction of > than 100 Kg/cm^2 and a compression of > than 600 Kg/cm2. Lifespan
of the wood in a marine environment is about 20 years. |
| |
The
floating docks are predisposed for eventual inspections of power and water. | Thickness
of the walls: 4.00 mm ; core of closed cell polystyrene foam unregenerate, 15/m3
density, set by prisoners in stainless steel AISI 316. |
| |
| Lateral buffers
in the same wood used for the walkway. Sect. 11.0 x 5.0 cm | -
with pairs of bolts in steel M22 with rubber pads in neoprene. Braking load for
compression not inferior to 90 Kg cm2 - with navigational fenders complete
with bushing in Teflon, which permit an increased navigation of the floating docks.
|
